IMPORTANT: DO NOT FORCE LONGER SCREWS INTO THE FRAME. MAKE SURE THE SCREW DEPTH IS 3MM. IF YOU FORCE LONGER SCREWS INTO THE FRAME THIS WILL DAMAGE THE INTERAL COMPONENTS OF THE FRAME. DO NOT USE AN ELECTRIC DRILL TO SCREW IN THE SCREWS, USE A HAND TOOL.
On the back of each ViewClix frame, there are 4 equally-spaced screw holes for industry standard VESA mounting.
If you search for "VESA wall mount or stand", you will see a huge variety of stand options and orientations that will work with your frame.
Most wall mounts or stands include a good variety of mounting hardware (measurements are metric).
The holes on the back of the ViewClix frame standard 75 mm spacing with an inset depth about 3 mm. The stand/mount should be 75mm x 75mm.
For all frames purchased after February 13, 2023, the screw threads are M4.
For frames purchased before February 13, 2023:
- The ViewClix 10, the screw threads are M3.
- The ViewClix 15, the screw threads are M4.
Here is a stand that we've tested with the ViewClix 15 and ViewClix 10 that works well:
IMPORTANT: THE SCREWS PROVIDED WITH THE ABOVE STAND MAY BE TOO LONG, PLEASE MEASURE SCREWS TO ENSURE THEY ARE THE CORRECT SIZE. IF YOU HAVE QUESTIONS ABOUT THE SCREWS PLEASE REACH OUT TO VIEWCLIX SUPPORT PRIOR TO USING THEM.